Mount a Wi-Fi access point without drilling: Mount One for TP-Link Omada Wall
Yes, it works: For TP-Link Omada Wall access points, Mount One offers a bracket that is fixed with the existing screws of your outlet or switch cover. No drilling, no glue, removable without a trace, ideal for rented flats.
Which access points fit?
The bracket fits all current TP-Link Omada Wall access points:
- EAP225-Wall
- EAP230-Wall
- EAP235-Wall
- EAP615-Wall
- EAP655-Wall
- EAP725-Wall
- EAP775-Wall
There is currently no bracket for other access points (for example UniFi). The access point itself is not included.
Isn't an access point too heavy for an outlet cover?
Mount One is designed for a load of up to 2 kg. The frame is fixed with the existing screws of your cover, not just clipped or glued on. Check your model's weight in the manufacturer's data sheet. It must be under 2 kg.
How does the access point get power and network?
The bracket comes with a Cat6A Ethernet cable (0.5 m, 90° angled plug). It disappears behind the bracket. Omada Wall access points are usually powered via PoE over the network cable. Check that your network socket delivers PoE (PoE switch or PoE injector).
The bracket is ventilated so the access point can dissipate its heat. It is made from PETG.
What do I need?
- Mount One frame (see below)
- Mount One access point bracket (TP-Link Omada Wall)
- Your TP-Link Omada Wall access point (available separately)
Which frame do I need?
Every bracket clips onto the Mount One frame. The Double fits 1-gang covers, the Tripple fits 2-gang covers. Switzerland: Double (CH) · Tripple (CH). Germany/Austria: Double (DE/AT) · Tripple (DE/AT).
Compatible outlet and switch covers
- Switzerland: Feller EDIZIOdue, Feller Standarddue, Feller SNAPFIX / EDIZIO.liv and Hager kallysto
- Germany and Austria: Gira, Busch-Jaeger, Jung, Berker and Merten
Not sure your cover fits? Check here whether Mount One fits your outlet. The video installation guide shows every step.
Safety note: Mount One only uses the fixing screws of the cover. For safety, switch off the circuit breaker before loosening the screws and do not touch live parts. Work on the electrical installation should be left to qualified professionals.