eufy Video Doorbell ohne Bohren an der Wand neben einer Schweizer Steckdose montiert

Mount a eufy doorbell without drilling: a solution for rented flats

A video doorbell is quickly bought. The difficult part is the installation: the supplied fixing calls for screws in the wall, and in a rented flat that is a problem. Drill holes are a point of dispute when you move out, and some landlords don't allow them. Adhesive tape hardly holds a camera with battery and cable permanently.

eufy Video Doorbell mounted on the wall next to a Swiss outlet without drilling

The solution: a holder on the outlet cover

The cover of your outlet or switch is screwed on anyway. The Mount One eufy Doorbell holder uses exactly those screws. You unscrew the cover, place the Mount One frame underneath, screw the cover back on with the same screws and clip on the holder. The doorbell then sits firmly on the wall without needing a new hole. When you move out you take everything off, and the wall stays unchanged.

Which eufy models fit?

The holder is made for these eufy Video Doorbell models:

  • eufy Video Doorbell E340 (Dual Cameras)
  • eufy Video Doorbell C31
  • eufy Video Doorbell C30
  • eufy Video Doorbell S330
  • eufy Video Doorbell S220

Mount One holder and frame for the eufy doorbell before installation

What you need

  • The eufy Video Doorbell (not included, buy it separately)
  • The holder
  • A Mount One frame: in Switzerland the Double or the Tripple, in Germany and Austria the Double or the Tripple

The holder is printed in PETG.

Installation in five steps

  1. Switch off the power and unscrew the cover of the outlet or switch.
  2. Place the Mount One frame under the cover.
  3. Screw the cover back on with the existing screws.
  4. Clip the holder onto the frame.
  5. Insert the eufy doorbell.

You will find all steps with pictures and video in the installation guide.

Will it fit my outlet?

Mount One is made for standard covers fixed with two screws. The compatibility check shows photos of the tested plates.

Frequently asked questions

Do I have to drill or glue?
No. The frame is fixed with the existing screws of the cover.

Is the doorbell included?
No. You buy the eufy doorbell separately; from us you get the holder and the frame.

Can I use it as a tenant?
Yes. When you move out, you unscrew the cover, remove the frame and screw the cover back on.

Is it available for Germany and Austria?
Yes, with the DE/AT frames. The compatibility check also shows the Schuko plates.

Questions about installation? Write to us at info@leafygreens.ch.

Back to blog